............................................................................................................................................... >> Weighing Systems
HB-500/1000CB
HB-666 SERIES
HB-777 SERIES
HB-888 SERIES A/B

>> HB-777 SERIES A/B ................................................................... BELT WEIGHERS UNIT
CAPACITY UP TO 5000 METRIC TONS PER HOUR, BELT WIDTHS UP TO 72" (1800m/m)

Belt Weighing unit are used to measure continuous material flows of varying amounts. When weighing material carried by a conveyor, one or more of the conveyor idlers is replaced by a weighing unit with idlers having the same geometry as the adjacent idlers. Weighing units, available in various versions, comprise the weighing module for accommodating user's idler set, load cell is equipped with mechanical and shock overload protection devices to prevent damage to the load cell.

 
>> APPLICATION
  • Continuous bulk solids measurement in belt conveyor system.
  • Bulk inventory control and management.
  • Continuous blending system.
  • Plant production measurement.
  • Flowrate control with weighfeeder controller.
HB-777 Weighing unit, featuring a modular design, is a complete unit, adaptable to all standard conveyor designs.
 
>> Batching Operating Type
  • Belt widths from 18 to 72 inches (450 to 1800 millimeters) are accommodated.
  • Conveyor capacities from a few tons per hour to 5000 metric tons per hour are accommodated by different load cell sizes with different ranges.
  • Certifiable heavy-duty design that utilizes single idler weighing units to make one-to-four weighing unit scales.
  • Trimming screws and bushings permit easy and accurate adjustment of the rollers to match the adjacent idlers on the conveyor. Shims, cutting and welding are not required for installation and alignment.
  • Special force hinge design is utilized to eliminate levers, pivots and bearings.
    This design eliminates weighing errors due to off-center belt loading.
  • Digital, photo-electric pulse generator for direct coupling to tail pulley or optional wheel assembly mounted between belt strands, 304 stainless steel enclosure.
  • The scale frame in which the weigh idler is mounted and which transmits the belt load to the load cell is equipped with mechanical and shock overload protection devices to prevent damage to the load cell.
  • Accuracy better than 0.25%-0.5% in two weigh modules with precision adjustable idler set.
  • Better than 0.125% can be reached in three weigh modules with precision adjustable idler set.
  • Calibration by electronic, material test, test chain (optional), or test weight (optional).
  • Heavy-duty construction, carbon steel with rust resistant primer, painted orange enamel all adjustment screws and bushings anodized for corrosion resistance.
>> OPTIONAL
  • 304 stainless steel construction is available by optional
  • Printers and recorders are available
  • Remote rate and totalizer meters.
>> SPECIFICATIONS------------------------------------------------------------------------Reference Dimensions
>> SPECIFICATIONS, Adjustable Idlers
Designation
for roller set
For belt widths mm
Adj. Troughing
Angle, V
W
mm
F1
450
-
460-500
F2
650
-
740-780
F3
700
-
880-920
F4
1000
-
1020-1060
F5
1300
-
1370-1410
Q1
500
15-25
620-660
P1
500-600
15-45
710-750
P2
700-850
10-45
810-850
P3
900-1050
10-45
1130-1170
P4
1100-1200
10-45
1340-1380
P5
1200-1350
10-45
1410-1450
P6
1000-1200
10-45
1440-1480
P7
1200-1400
10-45
1650-1690
P8
1400-1600
10-45
1840-1880
P9
1600-1800
10-45
2050-2090
>> Modular Belt Scales
All these advantages combined in the HB-8234 Series measuring system!
  • Extremely user friendly operator interface, including self-prompting instructions and messages.
  • Sealed membrane full-function keyboard.
  • Multi-function display: including 8 digit 10mm high upper read-out for numeric data, 128x64 dots LCD display full alpha-numeric lower read-out messages and instructions. Also 8 LED status indicators for annunciation of alarms, inputs, etc.
  • Total password security for protection of calibration constants and re-rate (capacity re-program ming) parameters.
  • Electrically isolated inputs and outputs. Additional inputs and outputs available with expansion modules.
  • Max. 16 dry contact input or NPN open collector transistor input. (option up to 32 D/I)
  • Max. 8 NPN open collector transistor output (option up to 16 D/O)
  • Panel mount and Wall mount enclosures available.
  • Automatic belt deviation monitoring. / Automatic belt slip monitoring.
  • User selectable English or Metric units of measurement.
  • Remote operation keyboard for systems.
  • Printer interface is available.
  • Chart recorder interface is available.
  • Excellent immunity to RFI and EMI.

HB-500/1000CB
HB-666 SERIES
HB-777 SERIES
HB-888 SERIES A/B

...................................................................................................................................>> Back


HOLBRIGHT WEIGHING SYSTEMS CD., LTD.
4F, No. 31, Lane 21 Min Chuan East Rd. Sec. 6 Nei Hu. Taipei. Taiwan R.O.C.
TEL: 886-2-8792-0786 FAX: 886-2-8791-2380
E-MAIL: hobright@ms11.hinet.net
     holbright@xuite.net
http://www.holbright.com.tw